Admin-Only Installer
Proposal for changes to wikka script to restrict installer to run only for an admin user.See Ticket #1111
Problem
When installing new code in a production environment, the installer script will run for any visitor to the site. It would be preferable if the script was restricted to running only for logged-in admin users.Solution
Code below outlines a solution. I try here to be as uninvasive as possible. The code could be made more secure. It has been successfully tested but not very thoroughly.Patch
The code is patched against 1.3.2-p7 release version of wikka.phpdiff -r 4d82ee3ea32c www/is/wikka.php
--- a/www/is/wikka.php Mon Jan 16 23:54:27 2012 -0800
+++ b/www/is/wikka.php Tue Jan 17 19:22:08 2012 -0800
@@ -509,26 +509,55 @@
/**
* Compare versions, start installer if necessary.
+ * Fresh installs run immediately. Wait until Wikka class is loaded to run
+ * upgrades so we can limit access to admin users. (See below.)
*/
-if (!isset($wakkaConfig['wakka_version'])) $wakkaConfig['wakka_version'] = 0;
-if ($wakkaConfig['wakka_version'] !== WAKKA_VERSION)
-{
- /**
- * Start installer.
- *
- * Data entered by the user is submitted in $_POST, next action for the
- * installer (which will receive this data) is passed as a $_GET parameter!
- */
- $installAction = 'default';
- if (isset($_GET['installAction'])) $installAction = trim($_GET['installAction']); #312
- if (file_exists('setup'.DIRECTORY_SEPARATOR.'header.php'))
- include('setup'.DIRECTORY_SEPARATOR.'header.php'); else print '<em class="error">'.ERROR_SETUP_HEADER_MISSING.'</em>'; #89
- if
- (file_exists('setup'.DIRECTORY_SEPARATOR.$installAction.'.php'))
- include('setup'.DIRECTORY_SEPARATOR.$installAction.'.php'); else print '<em class="error">'.ERROR_SETUP_FILE_MISSING.'</em>'; #89
- if (file_exists('setup'.DIRECTORY_SEPARATOR.'footer.php'))
- include('setup'.DIRECTORY_SEPARATOR.'footer.php'); else print '<em class="error">'.ERROR_SETUP_FOOTER_MISSING.'</em>'; #89
- exit;
+$is_new_install = ! isset($wakkaConfig['wakka_version']);
+$is_upgrade = $wakkaConfig['wakka_version'] !== WAKKA_VERSION;
+
+function start_installer() {
+ /**
+ * Start installer.
+ *
+ * Data entered by the user is submitted in $_POST, next action for the
+ * installer (which will receive this data) is passed as a $_GET parameter!
+ */
+ global $wakkaConfig, $wakkaConfigLocation, $fallback_lang_path;
+
+ $installAction = 'default';
+
+ if (isset($_GET['installAction'])) {
+ $installAction = trim($_GET['installAction']); #312
+ }
+
+ if (file_exists('setup'.DIRECTORY_SEPARATOR.'header.php')) {
+ include('setup'.DIRECTORY_SEPARATOR.'header.php');
+ }
+ else {
+ print '<em class="error">'.ERROR_SETUP_HEADER_MISSING.'</em>'; #89
+ }
+
+ if (file_exists('setup'.DIRECTORY_SEPARATOR.$installAction.'.php')) {
+ include('setup'.DIRECTORY_SEPARATOR.$installAction.'.php');
+ }
+ else {
+ print '<em class="error">'.ERROR_SETUP_FILE_MISSING.'</em>'; #89
+ }
+
+ if (file_exists('setup'.DIRECTORY_SEPARATOR.'footer.php')) {
+ include('setup'.DIRECTORY_SEPARATOR.'footer.php');
+ }
+ else {
+ print '<em class="error">'.ERROR_SETUP_FOOTER_MISSING.'</em>'; #89
+ }
+
+ exit;
+}
+
+
+if ( $is_new_install ) {
+ $wakkaConfig['wakka_version'] = 0;
+ start_installer();
}
/**
@@ -590,6 +619,7 @@
exit;
}
+
/**
* Save session ID
*/
@@ -609,6 +639,39 @@
$wakka->Query("INSERT INTO ".$wakka->config['table_prefix']."sessions (sessionid, userid, session_start) VALUES('".session_id()."', '".$user['name']."', FROM_UNIXTIME(".$wakka->GetMicroTime()."))");
}
}
+
+/**
+ * Check for upgrade. If so an user is admin, show setup page, else show
+ * a maintenance message to all other visitors.
+ *
+ * Add ?help=1 to the url if installer gets stuck and it will print some debug
+ * info.
+ */
+$is_admin = $wakka->IsAdmin($user);
+$install_action = isset($_GET['installAction']) ? $_GET['installAction'] : '';
+$help_requested = isset($_GET['help']) ? 1 : 0;
+$at_install_step = ( $install_action == 'writeconfig') && (isset($_POST['config']));
+$upgrade_allowed = $is_admin || $at_install_step;
+
+if ( $is_upgrade && $upgrade_allowed ) {
+ start_installer();
+}
+elseif ( $is_upgrade && $help_requested ) {
+ $debug_info = array(
+ '_POST' => $_POST,
+ '_GET' => $_GET,
+ '_SESSION' => $_SESSION
+ );
+ print "<h2>Installer Help</h2>";
+ printf('<pre>%s</pre>', print_r($debug_info,1));
+}
+elseif ( $is_upgrade ) {
+ header('HTTP/1.1 503 Service Temporarily Unavailable');
+ header('Status: 503 Service Temporarily Unavailable');
+ header('Retry-After: 300');
+ die('<h2>Site Undergoing Temporary Maintenance</h2><h4>Please check back shortly.</h4>');
+}
+
/**
* Run the engine.Full Updated wikka.php File
<?php
/**
* The Wikka mainscript.
*
* This file is called each time a request is made from the browser.
* Most of the core methods used by the engine are located in the Wakka class.
* @see Wakka
* This file was originally written by Hendrik Mans for WakkaWiki
* and released under the terms of the modified BSD license
* @see /docs/WakkaWiki.LICENSE
*
* @package Wikka
* @subpackage Core
* @version $Id$
* @license http://www.gnu.org/copyleft/gpl.html GNU General Public License
* @see /docs/Wikka.LICENSE
* @filesource
*
* @author {@link http://www.mornography.de/ Hendrik Mans}
* @author {@link http://wikkawiki.org/JsnX Jason Tourtelotte}
* @author {@link http://wikkawiki.org/JavaWoman Marjolein Katsma}
* @author {@link http://wikkawiki.org/NilsLindenberg Nils Lindenberg}
* @author {@link http://wikkawiki.org/DotMG Mahefa Randimbisoa}
* @author {@link http://wikkawiki.org/DarTar Dario Taraborelli}
* @author {@link http://wikkawiki.org/BrianKoontz Brian Koontz}
* @author {@link http://wikkawiki.org/TormodHaugen Tormod Haugen}
*
* @copyright Copyright 2002-2003, Hendrik Mans <[email protected]>
* @copyright Copyright 2004-2005, Jason Tourtelotte <[email protected]>
* @copyright Copyright 2006-2010, {@link http://wikkawiki.org/CreditsPage Wikka Development Team}
*
* @todo use templating class for page generation;
* @todo add phpdoc documentation for configuration array elements;
*/
// ---------------------- DEBUGGING AND ERROR REPORTING -----------------------
if(version_compare(phpversion(),'5.3','<'))
error_reporting(E_ALL);
else
error_reporting(E_ALL & !E_DEPRECATED);
// ---------------------- END DEBUGGING AND ERROR REPORTING -------------------
// ---------------------------- VERSIONING ------------------------------------
/**#@+
* Defines current Wikka version.
*/
include_once('version.php');
// ----------------------------- BASIC CONSTANTS -------------------------------
/**#@+
* Simple constant. May be made a configurable value.
*/
/**
* Defines the default cookie name.
*/
if (!defined('BASIC_COOKIE_NAME')) define('BASIC_COOKIE_NAME', 'Wikkawiki');
/**
* Length to use for generated part of id attribute.
*/
define('ID_LENGTH',10); // @@@ maybe make length configurable
/**
* Character used for multi-path lists
*/
if(!defined('PATH_DIVIDER')) define('PATH_DIVIDER', ',');
/**#@-*/
/**#@+
* Minimum version requirement.
*/
if (!defined('MINIMUM_PHP_VERSION')) define('MINIMUM_PHP_VERSION', '5.0');
if (!defined('MINIMUM_MYSQL_VERSION')) define('MINIMUM_MYSQL_VERSION', '4.1');
/**#@-*/
// ----------------------------- END BASIC CONSTANTS ---------------------------
// ------------ CRITICAL ERROR MESSAGES USED BEFORE LANG FILE LOADED -----------
// Do not move these declaration to lang files.
if(!defined('ERROR_WRONG_PHP_VERSION')) define('ERROR_WRONG_PHP_VERSION', 'Wikka requires PHP %s or higher!'); // %s - version number
if(!defined('ERROR_MYSQL_SUPPORT_MISSING')) define('ERROR_MYSQL_SUPPORT_MISSING', 'PHP can\'t find MySQL support but Wikka requires MySQL. Please check the output of <tt>phpinfo()</tt> in a php document for MySQL support: it needs to be compiled into PHP, the module itself needs to be present in the expected location, <strong>and</strong> php.ini needs to have it enabled.<br />Also note that you cannot have <tt>mysqli</tt> and <tt>mysql</tt> support both enabled at the same time.<br />Please double-check all of these things, restart your webserver after any fixes, and then try again!');
if(!defined('ERROR_WAKKA_LIBRARY_MISSING')) define('ERROR_WAKKA_LIBRARY_MISSING','The necessary file "libs/Wakka.class.php" could not be found. To run Wikka, please make sure the file exists and is placed in the right directory!');
// --------END: CRITICAL ERROR MESSAGES USED BEFORE LANG FILE LOADED -----------
// ----------------------------- SANITY CHECKS ---------------------------------
// More intelligent version check, more intelligently placed ;)
if (!function_exists('version_compare') ||
version_compare(phpversion(),MINIMUM_PHP_VERSION,'<') // < PHP minimum version??
)
{
$php_version_error = sprintf(ERROR_WRONG_PHP_VERSION,MINIMUM_PHP_VERSION);
die($php_version_error); # fatalerror !!! default error in English
}
// MySQL needs to be installed and available
// @@@ message could be refined by detecting detect OS (mention module name) and maybe server name
if (!function_exists('mysql_connect'))
{
die(ERROR_MYSQL_SUPPORT_MISSING);
}
/**
* Include main library if it exists.
* @see libs/Wakka.class.php
*/
if (file_exists('libs/Wakka.class.php'))
{
require_once('libs/Compatibility.lib.php');
require_once('libs/Wakka.class.php');
}
else
{
die(ERROR_WAKKA_LIBRARY_MISSING);
}
// ----------------------------- END SANITY CHECKS ----------------------------
ob_start();
global $tstart;
$tstart = getmicrotime();
ini_set('magic_quotes_runtime', 0);
if (get_magic_quotes_gpc())
{
magicQuotesWorkaround($_POST);
magicQuotesWorkaround($_GET);
magicQuotesWorkaround($_COOKIE);
}
/**
* Default configuration.
*/
// attempt to derive base URL fragments and whether rewrite mode is enabled (#438)
$t_domain = $_SERVER['SERVER_NAME'];
$t_scheme = ((isset($_SERVER['HTTPS'])) && !empty($_SERVER['HTTPS']) && 'off' != $_SERVER['HTTPS']) ? 'https://' : 'http://';
$t_port = ':'.$_SERVER['SERVER_PORT'];
if ((('http://' == $t_scheme) && (':80' == $t_port)) || (('https://' == $t_scheme) && (':443' == $t_port)))
{
$t_port = '';
}
$t_request = $_SERVER['REQUEST_URI'];
// append slash if $t_request does not end with either a slash or the string .php
if (!preg_match('@(\\.php|/)$@i', $t_request))
{
// $t_request .= '/';
}
if (preg_match('@\.php$@', $t_request) && !preg_match('@wikka\.php$@', $t_request))
{
// handle "overridden" redirect from index.php
$t_request = preg_replace('@/[^.]+\.php@', '/wikka.php', $t_request); // handle "overridden" redirect from index.php
}
if ( !preg_match('@wakka=@',$_SERVER['REQUEST_URI']) && isset($_SERVER['QUERY_STRING']) && preg_match('@wakka=@',$_SERVER['QUERY_STRING']))
{
// looks like we got a rewritten request via .htaccess
// remove 'wikka.php' and request (page name) from 'request' part: should not be part of base_url!
$query_part = preg_replace('@wakka=@', '', $_SERVER['QUERY_STRING']);
$t_request = preg_replace('@'.preg_quote('wikka.php').'@', '', $t_request);
$t_request = preg_replace('@'.preg_quote($query_part).'@', '', $t_request);
$t_query = '';
$t_rewrite_mode = 1;
}
else
{
// no rewritten request apparent
$t_query = '?wakka=';
$t_rewrite_mode = 0;
}
// ---------------------- DEFINE URL DOMAIN / PATH -----------------------------
/**#@+*
* URL or URL component, derived just once for later usage.
*/
// first derive domain, path and base_url, as well as cookie path just once
// so they are ready for later use.
// detect actual scheme (might be https!) @@@ TEST
// please recopy modif into setup/test/test-mod-rewrite.php
$scheme = ((isset($_SERVER['HTTPS'])) && !empty($_SERVER['HTTPS']) && 'off' != $_SERVER['HTTPS']) ? 'https://' : 'http://';
$server_port = ':'.$_SERVER['SERVER_PORT'];
if ((('http://' == $scheme) && (':80' == $server_port)) || (('https://' == $scheme) && (':443' == $server_port)))
{
$server_port = '';
}
/**
* URL fragment consisting of scheme + domain part.
* Represents the domain URL where the current instance of Wikka is located.
* This variable can be overriden in {@link override.config.php}
*
* @var string
*/
if (!defined('WIKKA_BASE_DOMAIN_URL')) define('WIKKA_BASE_DOMAIN_URL', $scheme.$_SERVER['SERVER_NAME'].$server_port);
/**
* URL fragment consisting of a path component.
* Points to the instance of Wikka within {@link WIKKA_BASE_DOMAIN_URL}.
*
* @var string
*/
define('WIKKA_BASE_URL_PATH', preg_replace('/wikka\\.php/', '', $_SERVER['SCRIPT_NAME']));
/**
* Base URL consisting of {@link WIKKA_BASE_DOMAIN_URL} and {@link WIKKA_BASE_URL_PATH} concatenated.
* Ready to append a relative path to a "static" file to.
*
* @var string
*/
define('WIKKA_BASE_URL', WIKKA_BASE_DOMAIN_URL.WIKKA_BASE_URL_PATH);
/**
* Path to be used for cookies.
* Derived from {@link WIKKA_BASE_URL_PATH}
*
* @var string
*/
define('WIKKA_COOKIE_PATH', ('/' == WIKKA_BASE_URL_PATH) ? '/' : substr(WIKKA_BASE_URL_PATH, 0, -1));
/**
* Default number of hours after which a permanent cookie is to expire: corresponds to 90 days.
*/
if (!defined('DEFAULT_COOKIE_EXPIRATION_HOURS')) define('DEFAULT_COOKIE_EXPIRATION_HOURS',90 * 24);
/**
* Path for Wikka libs
*
* @var string
*/
if(!defined('WIKKA_LIBRARY_PATH')) define('WIKKA_LIBRARY_PATH', 'lib');
/**#@-*/
// ----------------------- END URL DOMAIN / PATH -------------------------------
$wakkaDefaultConfig = array(
'mysql_host' => 'localhost',
'mysql_database' => 'wikka',
'mysql_user' => 'wikka',
'table_prefix' => 'wikka_',
'root_page' => 'HomePage',
'wakka_name' => 'MyWikkaSite',
// 'base_url' => $t_scheme.$t_domain.$t_port.$t_request.$t_query,
'rewrite_mode' => $t_rewrite_mode,
'wiki_suffix' => '@wikka',
'enable_user_host_lookup' => '0', #enable (1) or disable (0, default) lookup of user hostname from IP address
'action_path' => 'plugins/actions'.PATH_DIVIDER.'actions',
'handler_path' => 'plugins/handlers'.PATH_DIVIDER.'handlers',
'lang_path' => 'plugins/lang',
'gui_editor' => '1',
'default_comment_display' => 'threaded',
'theme' => 'light',
// formatter and code highlighting paths
'wikka_formatter_path' => 'plugins/formatters'.PATH_DIVIDER.'formatters', # (location of Wikka formatter - REQUIRED)
'wikka_highlighters_path' => 'formatters', # (location of Wikka code highlighters - REQUIRED)
'geshi_path' => '3rdparty/plugins/geshi', # (location of GeSHi package)
'geshi_languages_path' => '3rdparty/plugins/geshi/geshi', # (location of GeSHi language highlighting files)
// template
'wikka_template_path' => 'plugins/templates'.PATH_DIVIDER.'templates', # (location of Wikka template files - REQUIRED)
'feedcreator_path' => '3rdparty/core/feedcreator',
'menu_config_path' => 'config', #858
'safehtml_path' => '3rdparty/core/safehtml',
'referrers_purge_time' => '30',
'pages_purge_time' => '0',
'xml_recent_changes' => '10',
'hide_comments' => '0',
'require_edit_note' => '0', # edit note optional (0, default), edit note required (1) edit note disabled (2)
'anony_delete_own_comments' => '1',
'public_sysinfo' => '0', # enable or disable public display of system information in SysInfo
'double_doublequote_html' => 'safe',
'sql_debugging' => '0',
'admin_users' => '',
'admin_email' => '',
'upload_path' => 'uploads',
'mime_types' => 'mime_types.txt',
// code hilighting with GeSHi
'geshi_header' => 'div', # 'div' (default) or 'pre' to surround code block
'geshi_line_numbers' => '1', # disable line numbers (0), or enable normal (1) or fancy line numbers (2)
'geshi_tab_width' => '4', # set tab width
'grabcode_button' => '1', # allow code block downloading
'wikiping_server' => '',
'default_write_acl' => '+',
'default_read_acl' => '*',
'default_comment_read_acl' => '*',
'default_comment_post_acl' => '+',
'allow_user_registration' => '1',
'enable_version_check' => '1',
'version_check_interval' => '1h',
'default_lang' => 'en',
'spamlog_path' => './spamlog.txt.php',
'badwords_path' => './badwords.txt.php',
'spam_logging' => '0',
'content_filtering' => '0',
'max_new_document_urls' => '15',
'max_new_comment_urls' => '6',
'max_new_feedback_urls' => '6',
'utf8_compat_search' => '0'
);
// load config
$wakkaConfig = array();
if (file_exists('wakka.config.php')) rename('wakka.config.php', 'wikka.config.php"'); // upgrade from Wakka
#if (!$configfile = GetEnv("WAKKA_CONFIG")) $configfile = "wikka.config.php";
if (defined('WAKKA_CONFIG')) // use a define instead of GetEnv [SEC]
{
$configfile = WAKKA_CONFIG;
}
else
{
$configfile = 'wikka.config.php';
}
if (file_exists($configfile)) include($configfile);
$wakkaConfigLocation = $configfile;
// remove obsolete config settings (should come before merge!)
//TODO move these checks to a directive file to be used by the installer/upgrader, #97
if (isset($wakkaConfig['header_action']))
{
unset($wakkaConfig['header_action']); //since 1.1.6.4
}
if (isset($wakkaConfig['footer_action'])) //since 1.1.6.4
{
unset($wakkaConfig['footer_action']);
}
// Remove old stylesheet, #6
if(isset($wakkaConfig['stylesheet']))
{
unset($wakkaConfig['stylesheet']); // since 1.2
}
// Add plugin paths if they do not already exist
if(isset($wakkaConfig['action_path']) && preg_match('/plugins\/actions/', $wakkaConfig['action_path']) <= 0)
$wakkaConfig['action_path'] = "plugins/actions," . $wakkaConfig['action_path'];
if(isset($wakkaConfig['handler_path']) && preg_match('/plugins\/handlers/', $wakkaConfig['handler_path']) <= 0)
$wakkaConfig['handler_path'] = "plugins/handlers," . $wakkaConfig['handler_path'];
if(isset($wakkaConfig['wikka_template_path']) && preg_match('/plugins\/templates/', $wakkaConfig['wikka_template_path']) <= 0)
$wakkaConfig['wikka_template_path'] = "plugins/templates," . $wakkaConfig['wikka_template_path'];
if(isset($wakkaConfig['wikka_formatter_path']) && preg_match('/plugins\/formatters/', $wakkaConfig['wikka_formatter_path']) <= 0)
$wakkaConfig['wikka_formatter_path'] = "plugins/formatters," . $wakkaConfig['wikka_formatter_path'];
if(isset($wakkaConfig['lang_path']) && preg_match('/plugins\/lang/', $wakkaConfig['lang_path']) <= 0)
$wakkaConfig['lang_path'] = "plugins/lang," . $wakkaConfig['lang_path'];
$wakkaConfig = array_merge($wakkaDefaultConfig, $wakkaConfig); // merge defaults with config from file
// ---------------------------- LANGUAGE DEFAULTS -----------------------------
/**
* php-gettext
*/
include_once('localization.php');
/**
* Include language file(s) if it/they exist(s).
* @see /lang/en.inc.php
*
* Note that all lang_path entries in wikka.config.php are scanned for
* default_lang files in the order specified in lang_path, with the
* fallback language pack scanned last to pick up any undefined
* strings.
*
* TODO: Handlers and actions that use their own language packs are
* responsible for loading their own translation strings. This
* process should be unified across the application.
*
*/
$default_lang = $wakkaConfig['default_lang'];
$fallback_lang = 'en';
$default_lang_path = 'lang'.DIRECTORY_SEPARATOR.$default_lang;
$plugin_lang_path = $wakkaConfig['lang_path'].DIRECTORY_SEPARATOR.$default_lang;
$fallback_lang_path = 'lang'.DIRECTORY_SEPARATOR.$fallback_lang;
$default_lang_strings = $default_lang_path.DIRECTORY_SEPARATOR.$default_lang.'.inc.php';
$plugin_lang_strings = $plugin_lang_path.DIRECTORY_SEPARATOR.$default_lang.'.inc.php';
$fallback_lang_strings = $fallback_lang_path.DIRECTORY_SEPARATOR.$fallback_lang.'.inc.php';
$lang_packs_found = false;
if (file_exists($plugin_lang_strings))
{
require_once($plugin_lang_strings);
$lang_packs_found = true;
}
if (file_exists($default_lang_strings))
{
require_once($default_lang_strings);
$lang_packs_found = true;
}
if (file_exists($fallback_lang_strings))
{
require_once($fallback_lang_strings);
$lang_packs_found = true;
}
if(!$lang_packs_found)
{
die('Language file '.$default_lang_strings.' not found! In addition, the default language file '.$fallback_lang_strings.' is missing. Please add the file(s).');
}
if(!defined('WIKKA_LANG_PATH')) define('WIKKA_LANG_PATH', $default_lang_path);
// ------------------------- END LANGUAGE DEFAULTS -----------------------------
/**
* To activate multisite deployment capabilities, just create an empty file multi.config.php in
* your Wikkawiki installation directory. This file can contain an array definition for
* $multiConfig.
* Relevant keys in the array are a global directory for local settings 'local_config' and
* designated directories for different host requests, e.g. you may want http://example.com
* and http://www.example.com using the same local config file.
* 'http_www_example_com' => 'http.example.com'
* 'http_example_com' => 'http.example.com'
*/
$multisite_configfile = 'multi.config.php';
if (file_exists($multisite_configfile))
{
$wakkaGlobalConfig = $wakkaConfig; // copy config file, #878
$multiDefaultConfig = array(
'local_config' => 'wikka.config' # path to local configs
);
$multiConfig = array();
include($multisite_configfile);
$multiConfig = array_merge($multiDefaultConfig, $multiConfig); // merge default multi config with config from file
$configkey = str_replace('://','_',$t_scheme).str_replace('.','_',$t_domain);
if($t_port != '') $configkey .= '_'.$t_port;
/**
* Admin can decide to put a specific local config in a more readable and shorter directory.
* The $configkey is created as 'protocol_thirdleveldomain_secondleveldomain_topleveldomain'
* Subdirectories are not supported at the moment, but should be easy to implement.
* If no designated directory is found in multi.config.php, the script uses the $configkey
* value and replaces all underscore by dots:
* protocol.thirdleveldomain.secondleveldomain.topleveldomain e.g.
* http.www.example.com
*/
if (isset($multiConfig[$configkey])) $configpath = $multiConfig[$configkey];
else
{
$requested_host = str_replace('_','.',$configkey);
$configpath = $multiConfig['local_config'].DIRECTORY_SEPARATOR.$requested_host;
$multiConfig[$configkey] = $requested_host;
}
$local_configfile = $configpath.DIRECTORY_SEPARATOR.'local.config.php';
/**
* As each site may differ in its configuration and capabilities, we should consider using
* plugin directories below the $configpath. Effectively, this replaces the 1.1.6.6 plugins
* folder. It goes even a little bit further by providing a site specific upload directory.
*/
$localDefaultConfig = array(
'menu_config_path' => $configpath.DIRECTORY_SEPARATOR.'config'.PATH_DIVIDER.'config',
'action_path' => $configpath.DIRECTORY_SEPARATOR.'actions'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'actions'.PATH_DIVIDER.'actions',
'handler_path' => $configpath.DIRECTORY_SEPARATOR.'handlers'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'handlers'.PATH_DIVIDER.'handlers',
'wikka_formatter_path' => $configpath.DIRECTORY_SEPARATOR.'formatters'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'formatters'.PATH_DIVIDER.'formatters', # (location of Wikka formatter - REQUIRED)
'wikka_highlighters_path' => $configpath.DIRECTORY_SEPARATOR.'formatters'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'formatters'.PATH_DIVIDER.'formatters', # (location of Wikka code highlighters - REQUIRED)
'wikka_template_path' => $configpath.DIRECTORY_SEPARATOR.'templates'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'templates'.PATH_DIVIDER.'templates', # (location of Wikka template files - REQUIRED)
'upload_path' => $configpath.DIRECTORY_SEPARATOR.'uploads'
);
$localConfig = array();
if (!file_exists($configpath))
{
$path_parts = explode(DIRECTORY_SEPARATOR,$configpath);
$partialpath = '';
foreach($path_parts as $part)
{
$partialpath .= $part;
if (!file_exists($partialpath)) mkdir($partialpath,0755);
$partialpath .= DIRECTORY_SEPARATOR;
}
mkdir($configpath.DIRECTORY_SEPARATOR.'config',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'actions',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'handlers',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'handlers'.DIRECTORY_SEPARATOR.'page',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'formatters',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'templates',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'uploads',0755);
// if(file_exists($wakkaConfig['stylesheet'])) copy($wakkaConfig['stylesheet'],$localDefaultConfig['stylesheet']);
}
else if (file_exists($local_configfile)) include($local_configfile);
$wakkaGlobalConfig = array_merge($wakkaGlobalConfig, $localDefaultConfig); // merge global config with default local config
$wakkaConfigLocation = $local_configfile;
$wakkaConfig = array_merge($wakkaGlobalConfig, $wakkaConfig); // merge localized global config with local config from file
}
/**
* Check for locking.
*/
if (file_exists('locked'))
{
// read password from lockfile
$lines = file("locked");
$lockpw = trim($lines[0]);
// is authentification given?
$ask = false;
if (isset($_SERVER["PHP_AUTH_USER"])) {
if (!(($_SERVER["PHP_AUTH_USER"] == "admin") && ($_SERVER["PHP_AUTH_PW"] == $lockpw))) {
$ask = true;
}
} else {
$ask = true;
}
if ($ask) {
header("WWW-Authenticate: Basic realm=\"".$wakkaConfig["wakka_name"]." Install/Upgrade Interface\"");
header("HTTP/1.0 401 Unauthorized");
print T_("This site is currently being upgraded. Please try again later.");
exit;
}
}
/**
* Compare versions, start installer if necessary.
* Fresh installs run immediately. Wait until Wikka class is loaded to run
* upgrades so we can limit access to admin users. (See below.)
*/
$is_new_install = ! isset($wakkaConfig['wakka_version']);
$is_upgrade = $wakkaConfig['wakka_version'] !== WAKKA_VERSION;
function start_installer() {
/**
* Start installer.
*
* Data entered by the user is submitted in $_POST, next action for the
* installer (which will receive this data) is passed as a $_GET parameter!
*/
global $wakkaConfig, $wakkaConfigLocation, $fallback_lang_path;
$installAction = 'default';
if (isset($_GET['installAction'])) {
$installAction = trim($_GET['installAction']); #312
}
if (file_exists('setup'.DIRECTORY_SEPARATOR.'header.php')) {
include('setup'.DIRECTORY_SEPARATOR.'header.php');
}
else {
print '<em class="error">'.ERROR_SETUP_HEADER_MISSING.'</em>'; #89
}
if (file_exists('setup'.DIRECTORY_SEPARATOR.$installAction.'.php')) {
include('setup'.DIRECTORY_SEPARATOR.$installAction.'.php');
}
else {
print '<em class="error">'.ERROR_SETUP_FILE_MISSING.'</em>'; #89
}
if (file_exists('setup'.DIRECTORY_SEPARATOR.'footer.php')) {
include('setup'.DIRECTORY_SEPARATOR.'footer.php');
}
else {
print '<em class="error">'.ERROR_SETUP_FOOTER_MISSING.'</em>'; #89
}
exit;
}
if ( $is_new_install ) {
$wakkaConfig['wakka_version'] = 0;
start_installer();
}
/**
* Start session.
*/
$base_url_path = preg_replace('/wikka\.php/', '', $_SERVER['SCRIPT_NAME']);
$wikka_cookie_path = ('/' == $base_url_path) ? '/' : substr($base_url_path,0,-1);
session_set_cookie_params(0, $wikka_cookie_path);
session_name(md5(BASIC_COOKIE_NAME.$wakkaConfig['wiki_suffix']));
session_start();
if(!isset($_SESSION['CSRFToken']))
{
$_SESSION['CSRFToken'] = sha1(getmicrotime());
}
// fetch wakka location
/**
* Fetch wakka location (requested page + parameters)
*
* @todo files action uses POST, everything else uses GET #312
*/
$wakka = $_GET['wakka']; #312
/**
* Remove leading slash.
*/
$wakka = preg_replace("/^\//", "", $wakka);
/**
* Extract pagename and handler from URL
*
* Note this splits at the FIRST / so $handler may contain one or more slashes;
* this is not allowed, and ultimately handled in the Handler() method. [SEC]
*/
if (preg_match("#^(.+?)/(.*)$#", $wakka, $matches)) list(, $page, $handler) = $matches;
else if (preg_match("#^(.*)$#", $wakka, $matches)) list(, $page) = $matches;
//Fix lowercase mod_rewrite bug: URL rewriting makes pagename lowercase. #135
if ((strtolower($page) == $page) && (isset($_SERVER['REQUEST_URI']))) #38
{
$pattern = preg_quote($page, '/');
if (preg_match("/($pattern)/i", urldecode($_SERVER['REQUEST_URI']), $match_url))
{
$page = $match_url[1];
}
}
//$page = preg_replace('/_/', ' ', $page);
/**
* Create Wakka object
*/
$wakka = instantiate('Wakka',$wakkaConfig);
/**
* Check for database access.
*/
if (!$wakka->dblink)
{
echo '<em class="error">'.T_("Error: Unable to connect to the database.").'</em>';
exit;
}
/**
* Save session ID
*/
$user = $wakka->GetUser();
// Only store sessions for real users!
if(NULL != $user)
{
$res = $wakka->LoadSingle("SELECT * FROM ".$wakka->config['table_prefix']."sessions WHERE sessionid='".session_id()."' AND userid='".$user['name']."'");
if(isset($res))
{
// Just update the session_start time
$wakka->Query("UPDATE ".$wakka->config['table_prefix']."sessions SET session_start=FROM_UNIXTIME(".$wakka->GetMicroTime().") WHERE sessionid='".session_id()."' AND userid='".$user['name']."'");
}
else
{
// Create new session record
$wakka->Query("INSERT INTO ".$wakka->config['table_prefix']."sessions (sessionid, userid, session_start) VALUES('".session_id()."', '".$user['name']."', FROM_UNIXTIME(".$wakka->GetMicroTime()."))");
}
}
/**
* Check for upgrade. If so an user is admin, show setup page, else show
* a maintenance message to all other visitors.
*
* Add ?help=1 to the url if installer gets stuck and it will print some debug
* info.
*/
$is_admin = $wakka->IsAdmin($user);
$install_action = isset($_GET['installAction']) ? $_GET['installAction'] : '';
$help_requested = isset($_GET['help']) ? 1 : 0;
$at_install_step = ( $install_action == 'writeconfig') && (isset($_POST['config']));
$upgrade_allowed = $is_admin || $at_install_step;
if ( $is_upgrade && $upgrade_allowed ) {
start_installer();
}
elseif ( $is_upgrade && $help_requested ) {
$debug_info = array(
'_POST' => $_POST,
'_GET' => $_GET,
'_SESSION' => $_SESSION
);
print "<h2>Installer Help</h2>";
printf('<pre>%s</pre>', print_r($debug_info,1));
}
elseif ( $is_upgrade ) {
header('HTTP/1.1 503 Service Temporarily Unavailable');
header('Status: 503 Service Temporarily Unavailable');
header('Retry-After: 300');
die('<h2>Site Undergoing Temporary Maintenance</h2><h4>Please check back shortly.</h4>');
}
/**
* Run the engine.
*/
if (!isset($handler)) $handler='';
$wakka->Run($page, $handler);
$content = ob_get_contents();
/**
* Use gzip compression if possible.
*/
/*
if ( isset($_SERVER['HTTP_ACCEPT_ENCODING']) && strstr ($_SERVER['HTTP_ACCEPT_ENCODING'], 'gzip') && function_exists('gzencode') ) #38
{
// Tell the browser the content is compressed with gzip
header ("Content-Encoding: gzip");
$page_output = gzencode($content);
$page_length = strlen($page_output);
} else {
*/
$page_output = $content;
$page_length = strlen($page_output);
//}
// header("Cache-Control: pre-check=0");
header("Cache-Control: no-cache");
// header("Pragma: ");
// header("Expires: ");
$etag = md5($content);
header('ETag: '.$etag);
header('Content-Length: '.$page_length);
ob_end_clean();
/**
* Output the page.
*/
echo $page_output;
/**
* The Wikka mainscript.
*
* This file is called each time a request is made from the browser.
* Most of the core methods used by the engine are located in the Wakka class.
* @see Wakka
* This file was originally written by Hendrik Mans for WakkaWiki
* and released under the terms of the modified BSD license
* @see /docs/WakkaWiki.LICENSE
*
* @package Wikka
* @subpackage Core
* @version $Id$
* @license http://www.gnu.org/copyleft/gpl.html GNU General Public License
* @see /docs/Wikka.LICENSE
* @filesource
*
* @author {@link http://www.mornography.de/ Hendrik Mans}
* @author {@link http://wikkawiki.org/JsnX Jason Tourtelotte}
* @author {@link http://wikkawiki.org/JavaWoman Marjolein Katsma}
* @author {@link http://wikkawiki.org/NilsLindenberg Nils Lindenberg}
* @author {@link http://wikkawiki.org/DotMG Mahefa Randimbisoa}
* @author {@link http://wikkawiki.org/DarTar Dario Taraborelli}
* @author {@link http://wikkawiki.org/BrianKoontz Brian Koontz}
* @author {@link http://wikkawiki.org/TormodHaugen Tormod Haugen}
*
* @copyright Copyright 2002-2003, Hendrik Mans <[email protected]>
* @copyright Copyright 2004-2005, Jason Tourtelotte <[email protected]>
* @copyright Copyright 2006-2010, {@link http://wikkawiki.org/CreditsPage Wikka Development Team}
*
* @todo use templating class for page generation;
* @todo add phpdoc documentation for configuration array elements;
*/
// ---------------------- DEBUGGING AND ERROR REPORTING -----------------------
if(version_compare(phpversion(),'5.3','<'))
error_reporting(E_ALL);
else
error_reporting(E_ALL & !E_DEPRECATED);
// ---------------------- END DEBUGGING AND ERROR REPORTING -------------------
// ---------------------------- VERSIONING ------------------------------------
/**#@+
* Defines current Wikka version.
*/
include_once('version.php');
// ----------------------------- BASIC CONSTANTS -------------------------------
/**#@+
* Simple constant. May be made a configurable value.
*/
/**
* Defines the default cookie name.
*/
if (!defined('BASIC_COOKIE_NAME')) define('BASIC_COOKIE_NAME', 'Wikkawiki');
/**
* Length to use for generated part of id attribute.
*/
define('ID_LENGTH',10); // @@@ maybe make length configurable
/**
* Character used for multi-path lists
*/
if(!defined('PATH_DIVIDER')) define('PATH_DIVIDER', ',');
/**#@-*/
/**#@+
* Minimum version requirement.
*/
if (!defined('MINIMUM_PHP_VERSION')) define('MINIMUM_PHP_VERSION', '5.0');
if (!defined('MINIMUM_MYSQL_VERSION')) define('MINIMUM_MYSQL_VERSION', '4.1');
/**#@-*/
// ----------------------------- END BASIC CONSTANTS ---------------------------
// ------------ CRITICAL ERROR MESSAGES USED BEFORE LANG FILE LOADED -----------
// Do not move these declaration to lang files.
if(!defined('ERROR_WRONG_PHP_VERSION')) define('ERROR_WRONG_PHP_VERSION', 'Wikka requires PHP %s or higher!'); // %s - version number
if(!defined('ERROR_MYSQL_SUPPORT_MISSING')) define('ERROR_MYSQL_SUPPORT_MISSING', 'PHP can\'t find MySQL support but Wikka requires MySQL. Please check the output of <tt>phpinfo()</tt> in a php document for MySQL support: it needs to be compiled into PHP, the module itself needs to be present in the expected location, <strong>and</strong> php.ini needs to have it enabled.<br />Also note that you cannot have <tt>mysqli</tt> and <tt>mysql</tt> support both enabled at the same time.<br />Please double-check all of these things, restart your webserver after any fixes, and then try again!');
if(!defined('ERROR_WAKKA_LIBRARY_MISSING')) define('ERROR_WAKKA_LIBRARY_MISSING','The necessary file "libs/Wakka.class.php" could not be found. To run Wikka, please make sure the file exists and is placed in the right directory!');
// --------END: CRITICAL ERROR MESSAGES USED BEFORE LANG FILE LOADED -----------
// ----------------------------- SANITY CHECKS ---------------------------------
// More intelligent version check, more intelligently placed ;)
if (!function_exists('version_compare') ||
version_compare(phpversion(),MINIMUM_PHP_VERSION,'<') // < PHP minimum version??
)
{
$php_version_error = sprintf(ERROR_WRONG_PHP_VERSION,MINIMUM_PHP_VERSION);
die($php_version_error); # fatalerror !!! default error in English
}
// MySQL needs to be installed and available
// @@@ message could be refined by detecting detect OS (mention module name) and maybe server name
if (!function_exists('mysql_connect'))
{
die(ERROR_MYSQL_SUPPORT_MISSING);
}
/**
* Include main library if it exists.
* @see libs/Wakka.class.php
*/
if (file_exists('libs/Wakka.class.php'))
{
require_once('libs/Compatibility.lib.php');
require_once('libs/Wakka.class.php');
}
else
{
die(ERROR_WAKKA_LIBRARY_MISSING);
}
// ----------------------------- END SANITY CHECKS ----------------------------
ob_start();
global $tstart;
$tstart = getmicrotime();
ini_set('magic_quotes_runtime', 0);
if (get_magic_quotes_gpc())
{
magicQuotesWorkaround($_POST);
magicQuotesWorkaround($_GET);
magicQuotesWorkaround($_COOKIE);
}
/**
* Default configuration.
*/
// attempt to derive base URL fragments and whether rewrite mode is enabled (#438)
$t_domain = $_SERVER['SERVER_NAME'];
$t_scheme = ((isset($_SERVER['HTTPS'])) && !empty($_SERVER['HTTPS']) && 'off' != $_SERVER['HTTPS']) ? 'https://' : 'http://';
$t_port = ':'.$_SERVER['SERVER_PORT'];
if ((('http://' == $t_scheme) && (':80' == $t_port)) || (('https://' == $t_scheme) && (':443' == $t_port)))
{
$t_port = '';
}
$t_request = $_SERVER['REQUEST_URI'];
// append slash if $t_request does not end with either a slash or the string .php
if (!preg_match('@(\\.php|/)$@i', $t_request))
{
// $t_request .= '/';
}
if (preg_match('@\.php$@', $t_request) && !preg_match('@wikka\.php$@', $t_request))
{
// handle "overridden" redirect from index.php
$t_request = preg_replace('@/[^.]+\.php@', '/wikka.php', $t_request); // handle "overridden" redirect from index.php
}
if ( !preg_match('@wakka=@',$_SERVER['REQUEST_URI']) && isset($_SERVER['QUERY_STRING']) && preg_match('@wakka=@',$_SERVER['QUERY_STRING']))
{
// looks like we got a rewritten request via .htaccess
// remove 'wikka.php' and request (page name) from 'request' part: should not be part of base_url!
$query_part = preg_replace('@wakka=@', '', $_SERVER['QUERY_STRING']);
$t_request = preg_replace('@'.preg_quote('wikka.php').'@', '', $t_request);
$t_request = preg_replace('@'.preg_quote($query_part).'@', '', $t_request);
$t_query = '';
$t_rewrite_mode = 1;
}
else
{
// no rewritten request apparent
$t_query = '?wakka=';
$t_rewrite_mode = 0;
}
// ---------------------- DEFINE URL DOMAIN / PATH -----------------------------
/**#@+*
* URL or URL component, derived just once for later usage.
*/
// first derive domain, path and base_url, as well as cookie path just once
// so they are ready for later use.
// detect actual scheme (might be https!) @@@ TEST
// please recopy modif into setup/test/test-mod-rewrite.php
$scheme = ((isset($_SERVER['HTTPS'])) && !empty($_SERVER['HTTPS']) && 'off' != $_SERVER['HTTPS']) ? 'https://' : 'http://';
$server_port = ':'.$_SERVER['SERVER_PORT'];
if ((('http://' == $scheme) && (':80' == $server_port)) || (('https://' == $scheme) && (':443' == $server_port)))
{
$server_port = '';
}
/**
* URL fragment consisting of scheme + domain part.
* Represents the domain URL where the current instance of Wikka is located.
* This variable can be overriden in {@link override.config.php}
*
* @var string
*/
if (!defined('WIKKA_BASE_DOMAIN_URL')) define('WIKKA_BASE_DOMAIN_URL', $scheme.$_SERVER['SERVER_NAME'].$server_port);
/**
* URL fragment consisting of a path component.
* Points to the instance of Wikka within {@link WIKKA_BASE_DOMAIN_URL}.
*
* @var string
*/
define('WIKKA_BASE_URL_PATH', preg_replace('/wikka\\.php/', '', $_SERVER['SCRIPT_NAME']));
/**
* Base URL consisting of {@link WIKKA_BASE_DOMAIN_URL} and {@link WIKKA_BASE_URL_PATH} concatenated.
* Ready to append a relative path to a "static" file to.
*
* @var string
*/
define('WIKKA_BASE_URL', WIKKA_BASE_DOMAIN_URL.WIKKA_BASE_URL_PATH);
/**
* Path to be used for cookies.
* Derived from {@link WIKKA_BASE_URL_PATH}
*
* @var string
*/
define('WIKKA_COOKIE_PATH', ('/' == WIKKA_BASE_URL_PATH) ? '/' : substr(WIKKA_BASE_URL_PATH, 0, -1));
/**
* Default number of hours after which a permanent cookie is to expire: corresponds to 90 days.
*/
if (!defined('DEFAULT_COOKIE_EXPIRATION_HOURS')) define('DEFAULT_COOKIE_EXPIRATION_HOURS',90 * 24);
/**
* Path for Wikka libs
*
* @var string
*/
if(!defined('WIKKA_LIBRARY_PATH')) define('WIKKA_LIBRARY_PATH', 'lib');
/**#@-*/
// ----------------------- END URL DOMAIN / PATH -------------------------------
$wakkaDefaultConfig = array(
'mysql_host' => 'localhost',
'mysql_database' => 'wikka',
'mysql_user' => 'wikka',
'table_prefix' => 'wikka_',
'root_page' => 'HomePage',
'wakka_name' => 'MyWikkaSite',
// 'base_url' => $t_scheme.$t_domain.$t_port.$t_request.$t_query,
'rewrite_mode' => $t_rewrite_mode,
'wiki_suffix' => '@wikka',
'enable_user_host_lookup' => '0', #enable (1) or disable (0, default) lookup of user hostname from IP address
'action_path' => 'plugins/actions'.PATH_DIVIDER.'actions',
'handler_path' => 'plugins/handlers'.PATH_DIVIDER.'handlers',
'lang_path' => 'plugins/lang',
'gui_editor' => '1',
'default_comment_display' => 'threaded',
'theme' => 'light',
// formatter and code highlighting paths
'wikka_formatter_path' => 'plugins/formatters'.PATH_DIVIDER.'formatters', # (location of Wikka formatter - REQUIRED)
'wikka_highlighters_path' => 'formatters', # (location of Wikka code highlighters - REQUIRED)
'geshi_path' => '3rdparty/plugins/geshi', # (location of GeSHi package)
'geshi_languages_path' => '3rdparty/plugins/geshi/geshi', # (location of GeSHi language highlighting files)
// template
'wikka_template_path' => 'plugins/templates'.PATH_DIVIDER.'templates', # (location of Wikka template files - REQUIRED)
'feedcreator_path' => '3rdparty/core/feedcreator',
'menu_config_path' => 'config', #858
'safehtml_path' => '3rdparty/core/safehtml',
'referrers_purge_time' => '30',
'pages_purge_time' => '0',
'xml_recent_changes' => '10',
'hide_comments' => '0',
'require_edit_note' => '0', # edit note optional (0, default), edit note required (1) edit note disabled (2)
'anony_delete_own_comments' => '1',
'public_sysinfo' => '0', # enable or disable public display of system information in SysInfo
'double_doublequote_html' => 'safe',
'sql_debugging' => '0',
'admin_users' => '',
'admin_email' => '',
'upload_path' => 'uploads',
'mime_types' => 'mime_types.txt',
// code hilighting with GeSHi
'geshi_header' => 'div', # 'div' (default) or 'pre' to surround code block
'geshi_line_numbers' => '1', # disable line numbers (0), or enable normal (1) or fancy line numbers (2)
'geshi_tab_width' => '4', # set tab width
'grabcode_button' => '1', # allow code block downloading
'wikiping_server' => '',
'default_write_acl' => '+',
'default_read_acl' => '*',
'default_comment_read_acl' => '*',
'default_comment_post_acl' => '+',
'allow_user_registration' => '1',
'enable_version_check' => '1',
'version_check_interval' => '1h',
'default_lang' => 'en',
'spamlog_path' => './spamlog.txt.php',
'badwords_path' => './badwords.txt.php',
'spam_logging' => '0',
'content_filtering' => '0',
'max_new_document_urls' => '15',
'max_new_comment_urls' => '6',
'max_new_feedback_urls' => '6',
'utf8_compat_search' => '0'
);
// load config
$wakkaConfig = array();
if (file_exists('wakka.config.php')) rename('wakka.config.php', 'wikka.config.php"'); // upgrade from Wakka
#if (!$configfile = GetEnv("WAKKA_CONFIG")) $configfile = "wikka.config.php";
if (defined('WAKKA_CONFIG')) // use a define instead of GetEnv [SEC]
{
$configfile = WAKKA_CONFIG;
}
else
{
$configfile = 'wikka.config.php';
}
if (file_exists($configfile)) include($configfile);
$wakkaConfigLocation = $configfile;
// remove obsolete config settings (should come before merge!)
//TODO move these checks to a directive file to be used by the installer/upgrader, #97
if (isset($wakkaConfig['header_action']))
{
unset($wakkaConfig['header_action']); //since 1.1.6.4
}
if (isset($wakkaConfig['footer_action'])) //since 1.1.6.4
{
unset($wakkaConfig['footer_action']);
}
// Remove old stylesheet, #6
if(isset($wakkaConfig['stylesheet']))
{
unset($wakkaConfig['stylesheet']); // since 1.2
}
// Add plugin paths if they do not already exist
if(isset($wakkaConfig['action_path']) && preg_match('/plugins\/actions/', $wakkaConfig['action_path']) <= 0)
$wakkaConfig['action_path'] = "plugins/actions," . $wakkaConfig['action_path'];
if(isset($wakkaConfig['handler_path']) && preg_match('/plugins\/handlers/', $wakkaConfig['handler_path']) <= 0)
$wakkaConfig['handler_path'] = "plugins/handlers," . $wakkaConfig['handler_path'];
if(isset($wakkaConfig['wikka_template_path']) && preg_match('/plugins\/templates/', $wakkaConfig['wikka_template_path']) <= 0)
$wakkaConfig['wikka_template_path'] = "plugins/templates," . $wakkaConfig['wikka_template_path'];
if(isset($wakkaConfig['wikka_formatter_path']) && preg_match('/plugins\/formatters/', $wakkaConfig['wikka_formatter_path']) <= 0)
$wakkaConfig['wikka_formatter_path'] = "plugins/formatters," . $wakkaConfig['wikka_formatter_path'];
if(isset($wakkaConfig['lang_path']) && preg_match('/plugins\/lang/', $wakkaConfig['lang_path']) <= 0)
$wakkaConfig['lang_path'] = "plugins/lang," . $wakkaConfig['lang_path'];
$wakkaConfig = array_merge($wakkaDefaultConfig, $wakkaConfig); // merge defaults with config from file
// ---------------------------- LANGUAGE DEFAULTS -----------------------------
/**
* php-gettext
*/
include_once('localization.php');
/**
* Include language file(s) if it/they exist(s).
* @see /lang/en.inc.php
*
* Note that all lang_path entries in wikka.config.php are scanned for
* default_lang files in the order specified in lang_path, with the
* fallback language pack scanned last to pick up any undefined
* strings.
*
* TODO: Handlers and actions that use their own language packs are
* responsible for loading their own translation strings. This
* process should be unified across the application.
*
*/
$default_lang = $wakkaConfig['default_lang'];
$fallback_lang = 'en';
$default_lang_path = 'lang'.DIRECTORY_SEPARATOR.$default_lang;
$plugin_lang_path = $wakkaConfig['lang_path'].DIRECTORY_SEPARATOR.$default_lang;
$fallback_lang_path = 'lang'.DIRECTORY_SEPARATOR.$fallback_lang;
$default_lang_strings = $default_lang_path.DIRECTORY_SEPARATOR.$default_lang.'.inc.php';
$plugin_lang_strings = $plugin_lang_path.DIRECTORY_SEPARATOR.$default_lang.'.inc.php';
$fallback_lang_strings = $fallback_lang_path.DIRECTORY_SEPARATOR.$fallback_lang.'.inc.php';
$lang_packs_found = false;
if (file_exists($plugin_lang_strings))
{
require_once($plugin_lang_strings);
$lang_packs_found = true;
}
if (file_exists($default_lang_strings))
{
require_once($default_lang_strings);
$lang_packs_found = true;
}
if (file_exists($fallback_lang_strings))
{
require_once($fallback_lang_strings);
$lang_packs_found = true;
}
if(!$lang_packs_found)
{
die('Language file '.$default_lang_strings.' not found! In addition, the default language file '.$fallback_lang_strings.' is missing. Please add the file(s).');
}
if(!defined('WIKKA_LANG_PATH')) define('WIKKA_LANG_PATH', $default_lang_path);
// ------------------------- END LANGUAGE DEFAULTS -----------------------------
/**
* To activate multisite deployment capabilities, just create an empty file multi.config.php in
* your Wikkawiki installation directory. This file can contain an array definition for
* $multiConfig.
* Relevant keys in the array are a global directory for local settings 'local_config' and
* designated directories for different host requests, e.g. you may want http://example.com
* and http://www.example.com using the same local config file.
* 'http_www_example_com' => 'http.example.com'
* 'http_example_com' => 'http.example.com'
*/
$multisite_configfile = 'multi.config.php';
if (file_exists($multisite_configfile))
{
$wakkaGlobalConfig = $wakkaConfig; // copy config file, #878
$multiDefaultConfig = array(
'local_config' => 'wikka.config' # path to local configs
);
$multiConfig = array();
include($multisite_configfile);
$multiConfig = array_merge($multiDefaultConfig, $multiConfig); // merge default multi config with config from file
$configkey = str_replace('://','_',$t_scheme).str_replace('.','_',$t_domain);
if($t_port != '') $configkey .= '_'.$t_port;
/**
* Admin can decide to put a specific local config in a more readable and shorter directory.
* The $configkey is created as 'protocol_thirdleveldomain_secondleveldomain_topleveldomain'
* Subdirectories are not supported at the moment, but should be easy to implement.
* If no designated directory is found in multi.config.php, the script uses the $configkey
* value and replaces all underscore by dots:
* protocol.thirdleveldomain.secondleveldomain.topleveldomain e.g.
* http.www.example.com
*/
if (isset($multiConfig[$configkey])) $configpath = $multiConfig[$configkey];
else
{
$requested_host = str_replace('_','.',$configkey);
$configpath = $multiConfig['local_config'].DIRECTORY_SEPARATOR.$requested_host;
$multiConfig[$configkey] = $requested_host;
}
$local_configfile = $configpath.DIRECTORY_SEPARATOR.'local.config.php';
/**
* As each site may differ in its configuration and capabilities, we should consider using
* plugin directories below the $configpath. Effectively, this replaces the 1.1.6.6 plugins
* folder. It goes even a little bit further by providing a site specific upload directory.
*/
$localDefaultConfig = array(
'menu_config_path' => $configpath.DIRECTORY_SEPARATOR.'config'.PATH_DIVIDER.'config',
'action_path' => $configpath.DIRECTORY_SEPARATOR.'actions'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'actions'.PATH_DIVIDER.'actions',
'handler_path' => $configpath.DIRECTORY_SEPARATOR.'handlers'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'handlers'.PATH_DIVIDER.'handlers',
'wikka_formatter_path' => $configpath.DIRECTORY_SEPARATOR.'formatters'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'formatters'.PATH_DIVIDER.'formatters', # (location of Wikka formatter - REQUIRED)
'wikka_highlighters_path' => $configpath.DIRECTORY_SEPARATOR.'formatters'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'formatters'.PATH_DIVIDER.'formatters', # (location of Wikka code highlighters - REQUIRED)
'wikka_template_path' => $configpath.DIRECTORY_SEPARATOR.'templates'.PATH_DIVIDER.'plugins'.DIRECTORY_SEPARATOR.'templates'.PATH_DIVIDER.'templates', # (location of Wikka template files - REQUIRED)
'upload_path' => $configpath.DIRECTORY_SEPARATOR.'uploads'
);
$localConfig = array();
if (!file_exists($configpath))
{
$path_parts = explode(DIRECTORY_SEPARATOR,$configpath);
$partialpath = '';
foreach($path_parts as $part)
{
$partialpath .= $part;
if (!file_exists($partialpath)) mkdir($partialpath,0755);
$partialpath .= DIRECTORY_SEPARATOR;
}
mkdir($configpath.DIRECTORY_SEPARATOR.'config',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'actions',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'handlers',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'handlers'.DIRECTORY_SEPARATOR.'page',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'formatters',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'templates',0700);
mkdir($configpath.DIRECTORY_SEPARATOR.'uploads',0755);
// if(file_exists($wakkaConfig['stylesheet'])) copy($wakkaConfig['stylesheet'],$localDefaultConfig['stylesheet']);
}
else if (file_exists($local_configfile)) include($local_configfile);
$wakkaGlobalConfig = array_merge($wakkaGlobalConfig, $localDefaultConfig); // merge global config with default local config
$wakkaConfigLocation = $local_configfile;
$wakkaConfig = array_merge($wakkaGlobalConfig, $wakkaConfig); // merge localized global config with local config from file
}
/**
* Check for locking.
*/
if (file_exists('locked'))
{
// read password from lockfile
$lines = file("locked");
$lockpw = trim($lines[0]);
// is authentification given?
$ask = false;
if (isset($_SERVER["PHP_AUTH_USER"])) {
if (!(($_SERVER["PHP_AUTH_USER"] == "admin") && ($_SERVER["PHP_AUTH_PW"] == $lockpw))) {
$ask = true;
}
} else {
$ask = true;
}
if ($ask) {
header("WWW-Authenticate: Basic realm=\"".$wakkaConfig["wakka_name"]." Install/Upgrade Interface\"");
header("HTTP/1.0 401 Unauthorized");
print T_("This site is currently being upgraded. Please try again later.");
exit;
}
}
/**
* Compare versions, start installer if necessary.
* Fresh installs run immediately. Wait until Wikka class is loaded to run
* upgrades so we can limit access to admin users. (See below.)
*/
$is_new_install = ! isset($wakkaConfig['wakka_version']);
$is_upgrade = $wakkaConfig['wakka_version'] !== WAKKA_VERSION;
function start_installer() {
/**
* Start installer.
*
* Data entered by the user is submitted in $_POST, next action for the
* installer (which will receive this data) is passed as a $_GET parameter!
*/
global $wakkaConfig, $wakkaConfigLocation, $fallback_lang_path;
$installAction = 'default';
if (isset($_GET['installAction'])) {
$installAction = trim($_GET['installAction']); #312
}
if (file_exists('setup'.DIRECTORY_SEPARATOR.'header.php')) {
include('setup'.DIRECTORY_SEPARATOR.'header.php');
}
else {
print '<em class="error">'.ERROR_SETUP_HEADER_MISSING.'</em>'; #89
}
if (file_exists('setup'.DIRECTORY_SEPARATOR.$installAction.'.php')) {
include('setup'.DIRECTORY_SEPARATOR.$installAction.'.php');
}
else {
print '<em class="error">'.ERROR_SETUP_FILE_MISSING.'</em>'; #89
}
if (file_exists('setup'.DIRECTORY_SEPARATOR.'footer.php')) {
include('setup'.DIRECTORY_SEPARATOR.'footer.php');
}
else {
print '<em class="error">'.ERROR_SETUP_FOOTER_MISSING.'</em>'; #89
}
exit;
}
if ( $is_new_install ) {
$wakkaConfig['wakka_version'] = 0;
start_installer();
}
/**
* Start session.
*/
$base_url_path = preg_replace('/wikka\.php/', '', $_SERVER['SCRIPT_NAME']);
$wikka_cookie_path = ('/' == $base_url_path) ? '/' : substr($base_url_path,0,-1);
session_set_cookie_params(0, $wikka_cookie_path);
session_name(md5(BASIC_COOKIE_NAME.$wakkaConfig['wiki_suffix']));
session_start();
if(!isset($_SESSION['CSRFToken']))
{
$_SESSION['CSRFToken'] = sha1(getmicrotime());
}
// fetch wakka location
/**
* Fetch wakka location (requested page + parameters)
*
* @todo files action uses POST, everything else uses GET #312
*/
$wakka = $_GET['wakka']; #312
/**
* Remove leading slash.
*/
$wakka = preg_replace("/^\//", "", $wakka);
/**
* Extract pagename and handler from URL
*
* Note this splits at the FIRST / so $handler may contain one or more slashes;
* this is not allowed, and ultimately handled in the Handler() method. [SEC]
*/
if (preg_match("#^(.+?)/(.*)$#", $wakka, $matches)) list(, $page, $handler) = $matches;
else if (preg_match("#^(.*)$#", $wakka, $matches)) list(, $page) = $matches;
//Fix lowercase mod_rewrite bug: URL rewriting makes pagename lowercase. #135
if ((strtolower($page) == $page) && (isset($_SERVER['REQUEST_URI']))) #38
{
$pattern = preg_quote($page, '/');
if (preg_match("/($pattern)/i", urldecode($_SERVER['REQUEST_URI']), $match_url))
{
$page = $match_url[1];
}
}
//$page = preg_replace('/_/', ' ', $page);
/**
* Create Wakka object
*/
$wakka = instantiate('Wakka',$wakkaConfig);
/**
* Check for database access.
*/
if (!$wakka->dblink)
{
echo '<em class="error">'.T_("Error: Unable to connect to the database.").'</em>';
exit;
}
/**
* Save session ID
*/
$user = $wakka->GetUser();
// Only store sessions for real users!
if(NULL != $user)
{
$res = $wakka->LoadSingle("SELECT * FROM ".$wakka->config['table_prefix']."sessions WHERE sessionid='".session_id()."' AND userid='".$user['name']."'");
if(isset($res))
{
// Just update the session_start time
$wakka->Query("UPDATE ".$wakka->config['table_prefix']."sessions SET session_start=FROM_UNIXTIME(".$wakka->GetMicroTime().") WHERE sessionid='".session_id()."' AND userid='".$user['name']."'");
}
else
{
// Create new session record
$wakka->Query("INSERT INTO ".$wakka->config['table_prefix']."sessions (sessionid, userid, session_start) VALUES('".session_id()."', '".$user['name']."', FROM_UNIXTIME(".$wakka->GetMicroTime()."))");
}
}
/**
* Check for upgrade. If so an user is admin, show setup page, else show
* a maintenance message to all other visitors.
*
* Add ?help=1 to the url if installer gets stuck and it will print some debug
* info.
*/
$is_admin = $wakka->IsAdmin($user);
$install_action = isset($_GET['installAction']) ? $_GET['installAction'] : '';
$help_requested = isset($_GET['help']) ? 1 : 0;
$at_install_step = ( $install_action == 'writeconfig') && (isset($_POST['config']));
$upgrade_allowed = $is_admin || $at_install_step;
if ( $is_upgrade && $upgrade_allowed ) {
start_installer();
}
elseif ( $is_upgrade && $help_requested ) {
$debug_info = array(
'_POST' => $_POST,
'_GET' => $_GET,
'_SESSION' => $_SESSION
);
print "<h2>Installer Help</h2>";
printf('<pre>%s</pre>', print_r($debug_info,1));
}
elseif ( $is_upgrade ) {
header('HTTP/1.1 503 Service Temporarily Unavailable');
header('Status: 503 Service Temporarily Unavailable');
header('Retry-After: 300');
die('<h2>Site Undergoing Temporary Maintenance</h2><h4>Please check back shortly.</h4>');
}
/**
* Run the engine.
*/
if (!isset($handler)) $handler='';
$wakka->Run($page, $handler);
$content = ob_get_contents();
/**
* Use gzip compression if possible.
*/
/*
if ( isset($_SERVER['HTTP_ACCEPT_ENCODING']) && strstr ($_SERVER['HTTP_ACCEPT_ENCODING'], 'gzip') && function_exists('gzencode') ) #38
{
// Tell the browser the content is compressed with gzip
header ("Content-Encoding: gzip");
$page_output = gzencode($content);
$page_length = strlen($page_output);
} else {
*/
$page_output = $content;
$page_length = strlen($page_output);
//}
// header("Cache-Control: pre-check=0");
header("Cache-Control: no-cache");
// header("Pragma: ");
// header("Expires: ");
$etag = md5($content);
header('ETag: '.$etag);
header('Content-Length: '.$page_length);
ob_end_clean();
/**
* Output the page.
*/
echo $page_output;
